Conference Publications

To date, a total number of 376  conference publications have been completed by the Department of Materials Science and Engineering faculty. 

2012

  1. Vijaya Kumar Rangari, Boniface Tiimob, Shaik Jeelani, “Mechanochemical Synthesis of Bio Based Calcium Silicate Nanoparticles for Biomedical Applications,” MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center, Boston, MA.
  2. Vijaya Kumar Rangari, Temesgen Samuel, Vitus Apalangya, Shaik Jeelani, “Fabrication and Characterization of Poly (methyl methacrylate)/Bio-based Hydroxyapatite Composites for Scaffold Applications,” MRS Fall Meeting & Exhibit, November 25 - 30, 2012, Hynes Convention Center, Boston, MA.
  3. M. M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, Ashok Kumar, S. Jeelani, “Optimization of low velocity impact properties of e-glass/epoxy composites using plasticizing modifiers” ASME, Texas, 2012
  4. M. M. Rahman, S. Zainuddin, M. V. Hosur, Ashok Kumar, J. Trovillion, S. Jeelani, “Effect of amino-functionalized MWCNTs on high velocity impact properties of E-glass/epoxy composites” American Society of Composites conference, Texas, 2012.
  5. M. M. Rahman, S. Zainuddin, M. V. Hosur, S. Jeelani, “A study on enhancement of energy absorption capability of glass fiber reinforced epoxy composites using plasticizing modifier”  SAMPE conference, Maryland, 2012.
  6. T.A. Hassan, V.K. Rangari, S. Jeelani, “Synthesis and Characterization of Bio-based CACO3/Bio- plast GS 2189 Nanocomposites,” SAMPE-Tech 2012. Charleston Convention Center, North Charleston, South Carolina Conference: October 22-25, 2012.
  7. D.L. Render, V. Rangari, S. Jeelani, T. Samuel, K. Fadlalla, “Bio-Based Calcium Carbonate Nanoparticles for Drug Delivery Applications,” SAMPE-Tech 2012 Charleston Convention Center, North Charleston, South Carolina Conference: October 22-25, 2012.
  8. James L. Davis, Vijaya K. Rangari, Shaik Jeelani, “Microscopic, Thermal and Mechanical Characterizationof Hybrid Nanoparticles of SiC/SiO2 Infused PolypropyleneComposites,” Microscopy and Microanalysis, July 29-Aug 2nd 2012, Phoenix, AZ.
  9. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “studies on cure kinetics and UV radiation of nanoclay modified SC15 epoxy resin used in structural applications,” SAMPE Fall Conference, October 25, 2012, Charleston, SC.
  10. Eldon D. Triggs II, Alfred Tcherbi - Narteh, Mahesh V. Hosur, Shaik Jeelani, “Cure and Thermomechanical Characterization of Partially Bio-renewable Soybean Based Polyester Resin and Jute Fiber Laminates,” SAMPE Fall Conference, October 23, 2012, Charleston, SC.
  11. M.B.A. Salam, M.V. Hosur, M. Jones, M. Fletcher, S. Jeelani, “Mechanical and Thermomechanical Behavior of Carbon/Epoxy Composites with Carboxyl Functionalized Multi-Walled Carbon Nanotubes,”  Proceedings of the Nanocon 012, 2nd International Conference on Nanotechnology Innovative Materials, Processes, Products and Applications, October 18-19, 2012, Pune, India.
  12. Eldon D. Triggs II, Mahesh V. Hosur, Shaik Jeelani, “Jute and Flax Based Biodegradable Composites for High Power Amateur Rocket Structural Applications,” Proceedings of the American Society for Composites Conference, Sept. 30-August 3, 2012, Arlington, TX.
  13. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Jeelani, “Effects of UV Radiation On Degradation of Material Properties of Diglycidyl Ether of Bisphenol A (DGEBA) Epoxy Modified With Different Montmorillonite Nanoclays,” Proceedings of the American Society for Composites Conference, Sept. 30-August 3, 2012, Arlington, TX.
  14. Muhammad Rahman, Mahesh Hosur, Shaik Zainuddin, Uday Vaidya, Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Effect of amino-functionalized MWCNTs on high velocity impact properties of E-glass/epoxy composites,” Proceedings of the American Society for Composites Conference, Sept. 30-August 3, 2012, Arlington, TX.
  15. Mahesh Hosur, Mohammad Hossain, Alfred-Tcherbi Narteh, Md. Kazi Imraan, and S. Jeelani, “Effect of Nanoclay in Reducing Environmental Degradation of Carbon/Epoxy Nanocomposites,” Proceedings of the 33rd International Technical Conference and Forum, SEICO 12, Paris, France.
  16. K. Vig, P. Tiwari, A. Parveen, V. Rangari, S.R. Singh, “Supermagnatic Iron Oxide Nanoparticles Toxicity to Mammalian Cells Nanotech,” June 18-21, Santa Clara CA, Nanotech, 2012 Vol. 3.
  17. Diane Render, VijayaRangari, KhaldaFadlalla, Temesgen Samueland ShaikJeelani, “Biobased Calcium Carbonate (CaCO3) Nanoparticles for Drug Delivery Applications Biosensors & Bioelectronics,” May 14-16, 2012, Las Vegas, CA.
  18. Vitus Apalangya, Vijaya Rangari, Temesgen Samuel, Shaik Jeelani, “Synthesis of silver nanoparticles in porous activated charcoal for water purification applications,” Biosensors & Bioelectronics-2012 May 14-16 Las Vegas, CA.
  19. Myisha Roberson, Vijaya Rangari, Clayton Yates, Temesgen Samuel, Shaik Jeelani, “Profiling and Characterization of Silver, Zinc Oxide and Silver/ Zinc Oxide Hybrid Nanoparticles for antimicrobial and antifungal properties,”  MRS Spring, April 5-3, 2012, San Francisco, CA.

2011

  1. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on the Durability of Woven Carbon/Epoxy Composites,” International Conference on Composites for 21st Century: Current & Future Trends, Jan. 4-7, 2011, Bangalore, India (invited).
  2. M. V. Hosur, H. Maroju, and S. Jeelani, “Effect of Alkali Treatment on the Performance of Flax Fiber Reinforced Polyester Composites,” Proceedings of the International Conference on Mechanical Engineering (ICME 2011), Dhaka, Bangladesh.
  3. Y. Zhou, M. Hosur, S. Jeelani, and S. Zainuddin, “Effect of clay on tensile, flex and fatigue behavior of carbon fiber reinforced epoxy,” Proceedings of IMECE 20011, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA.
  4. Tarig A. Hassan, Vijay K. Rangari and Shaik Jeelani, “Synthesis and Characterization of Bio-based CaCO3/Polylite polymer nanocomposites,” ICME-2011, 18-20 December 2011, BUET, Dhaka, Bangladesh.
  5. V.K.Rangari, Md. Reza-E-Rabby, S. Jeelani, “Thermal and Mechanical Properties of Microwave cured SiC/ EPOXY Nanocomposites,” ICCM-18 International Conference of Composite Materials Jeju, Korea Aug 21st-26th 2011.
  6. Ashley Heard, Vitus Apalangya, Vijaya K Rangari and ShaikJeelani, “Synthesis and characterization of Hybrid titanium/ calcium carbonate nanoparticles for Tissue regeneration applications,” 241st ACS National Meeting & Exposition, March 27-31, 2011, Anaheim, CA.
  7. M. M. Rahman, S. Zainuddin, M. V. Hosur, A. Kumar, J. Trovillion, S. Jeelani, “Effect of enhanced crosslink density on interfacial strength of E-glass/epoxy composites modified by amino-functionalized MWCNTs”, ICME, Dhaka-Bangladesh, Dec. 18-20, 2011.
  8. M.B.A. Salam , M. V. Hosur, S. Zainuddin, S. Jeelani , “Characterization of NH2-MWCNT/ epoxy nanocomposites using two different curing cycles,” ICME, Dhaka-Bangladesh, Dec. 18-20, 2011.
  9. Nusrat Jahan, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani, “Mechanical and thermal characterization of COOH-functionalized MWCNT infused epon 862 nanocomposites”, ICME, Dhaka-Bangladesh, Dec. 18-20, 2011.
  10. M.B.A. Salam, S. Zainuddin, M. V. Hosur, M. M. Rahman, J. Holly Jr., S. Jeelani, “Mechanical and thermal investigation of NH2 functionalized multi-walled carbon nanotube epoxy nanocomposite”, SAMPE TECH, Fort Worth, TX, Oct. 17-20, 2011.
  11. M. M. Rahman, S. Zainuddin, M. V. Hosur, C. J. Robertson, M.B.A. Salam, Ashok Kumar, S. Jeelani, “Experimental investigation of E-glass/epoxy composites modified using NH2 functionalized multi-walled carbon nanotubes through sonication and calendaring methods”, SAMPE TECH, Fort Worth, TX, Oct. 17-20, 2011.
  12. V.K. Rangari, R. Samsur, S. Jeelani, “In-situ growth of CNTs on Woven Carbon Fiber for Advanced Structural Applications,” SAMPE-May 23-26, 2011, Long Beach, CA.
  13. V.K. Rangari, A. Gaines, S. Jeelani, “Synthesis and Characterization of Poly (Methyl Methacrylate)/Aerosil Silica Nanocomposite Thin Films,” SAMPE-May 23-26, 2011, Long Beach, CA.
  14. A. Tcherbi-Narteh, M. Hosur, and S. Jeelani, “Mechanical and Thermal Properties of Carbon/Epoxy Nanoclay Composites Exposed to Synergistic Effect Of UV Radiation and Condensation,” Proceedings of the 18th International Conference on Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.
  15. M. Harika, M.  Hosur, S. Jeelani, “Studies on the Fabrication and Characterization of Flax Fiber/Bio-Composites,” CD Proceedings of the 18th International Conference on Composite Materials (ICCM-18), August 21-26, 2011, Jeju Islands, South Korea.
  16. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Durability Study of Nanophased Jute-Based Green Composites,” CD proceedings of the Nanotech Conference and Expo 2011, June 13-16, 2011.
  17. M. K. Hossain, C. Okoro, M. V. Hosur, S. Jeelani, and V. Rangari, “Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” CD proceedings of the Nanotech Conference and Expo 2011, June 13-16, 2011.
  18. C.U. Okoro, M.K. Hossain, M. Hosur, S. Jeelani, “Mechanical and Thermal Characterization of XD- Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.
  19. M.K. Hossain, M.W. Dewan, R. Carver, M. Hosur, S. Jeelani, “Thermal and Mechanical Performance of Jute- Polyester Nanophased Biocomposites,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011.
  20. M.K. Hossain, K.A. Imran, M. Hosur, S. Jeelani, “Effect of Seawater on Mechanical Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Proceedings of the SAMPE Conference, 2011, Long Beach, CA, May 23, 2011. 

2010

  1. Vijaya K Rangari, Sanchita Dey, Mohammad Ghouse, Shaik Jeelani, “Metal and metal oxide coated CNTs their applications in thermoset and thermoplastic polymers,” International   Conference on Carbon Nanotechnology: Potential and Challenges, Indian Institute of Technology Kanpur, December 15-17, 2010, INDIA.
  2. Mahesh Hosur and Shaik Jeelani, “Polymer Matrix/MWCNT Nanocomposites: Challenges and Opportunities as Materials for Structural Applications,”  “Carbon Nanotechnology: Potential and Challenges,” with a theme of “Innovations in Carbon Nanotechnology for the New Century,” 15-17 December 2010, Kanpur, India (invited).
  3. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, “Static and High Strain Rate Compression Response of Carbon/Epoxy-Nanoclay Composites Subjected to Synergistic Effect of UV Radiation and Condensation,” 7th Asian Australasian Conference on Composite Materials, ACCM-7, 15-18 November, 2010, Taipei, Taiwan.
  4. Shaik Zainuddin, Mahesh Hosur, Harish Rao, Rajib Barua, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, “Influence of Non-Functionalized and Functionalized MWCNTs on Mechanical and Thermal Properties of Epoxy Composites,” International Mechanical Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver, Canada.
  5. S. Zainuddin, M. V. Hosur, R. Barua, H. Rao and S. Jeelani, “Influence of amino functionalized multi-walled carbon nanotube reinforcement on the mechanical and thermal properties of SC-15 epoxy nanocomposite,” ‘nano Future’, for the 21st Century, International conference on “Nanotechnology – Materials and Composites for Frontier Applications,” 14-15, October, 2010, Pune, India (Invited).
  6. Alfred Tcherbi-Narteh, Mahesh V. Hosur, Shaik Zainuddin, Shaik Jeelani, “Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation,” International Mechanical Engineering Congress and Exposition, IMECE 2010, November 12-18, Vancouver, Canada.
  7. Alfred Tcherbi-Narteh, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani “Compression and Flexural Response of Carbon/Epoxy-Nanoclay Nanocomposites Subjected to UV Radiation and Condensation,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT.
  8. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, “Processing and Characterization of VGCNF Infused Epoxy Nanocomposites Using Three Different Techniques,” SAMPE Fall Conference, 11-14 October, 2010, Salt Lake City, UT.
  9. Mahesh V. Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, “Processing Optimization and Characterization of MWCNT infused Epoxy Nanocomposites Using Three Different Techniques,” proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
  10. G. Strawder, M. Hosur, S. Jeelani, “Thermal and Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
  11. M.K. Hossain, M.W. Dewan, M. Hosur, S. Jeelani, “Mechanical and Thermal Characterization of Modified Jute/Biopol Nanophased Green Composite,” Proceedings of the American Society for Composites, Technical conference, Sept. 19-21, 2010, Dayton, OH.
  12. M.K. Hossain, M. Hosur, S. Jeelani, “Effects of CNF on Compression and Thermal Responses of E-Glass/Polyester Nanocomposite,” Proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
  13. Alfred Tcherbi-Narteh, M.V. Hosur, S. Jeelani, “Effect of UV Radiation on Mechanical and Thermal Properties of Carbon Fiber Reinforced Polymer Composites,” Proceedings of the American Society for Composites, technical conference, Sept. 19-21, 2010, Dayton, OH.
  14. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, Yadira Perez, “Processing and Characterization of Epoxy Nanocomposites with MWCNTs/CNFs Using Thinky and 3-Roll Shear Mixing Techniques,” 1st TMS-ABM International Materials Congress, July 26-30, 2010, Rio de Janeiro, Brazil.
  15. Mahesh Hosur, Md. Atiqur Rahman, Shaik Jeelani, “Impact Response of Nanophased Foam Core Sandwich Composites with Braided Carbon/Epoxy Facings,” 9th International Conference on Sandwich Structures, ICSS 9, Pasadena, CA, June 14-16, 2010.
  16. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Vijay Rangari, “High Strain Rate Compression Behavior of Conventional and CNF-Filled-Nanophased Glass/Polyester Composites,”, Proceedings of the NSTI-Nanotech Conference , CA, USA, June 21-24 (2010).
  17. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Vijay Rangari, “Fabrication and Thermo-mechanical Characterization of CNF-Filled Polyester and E-Glass/Polyester Nanophased Composites,” Proceedings of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).
  18. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur, Shaik Jeelani and Vijay Rangari, “High Strain Rate Compression Behavior of Conventional and CNF-Filled-Nanophased Glass/Polyester Composites,” Proceedings of the NSTI-Nanotech Conference, CA, USA, June 21-24 (2010).
  19. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh V. Hosur and Shaik Jeelani, “Dynamic Characterization of CNF-Filled E-Glass/Polyester Nanophased Composite,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010).
  20. Y. Zhou, E. White II, M. Hosur, S. Jeelani, “Influence of TiO2 Nanoparticles on Flexural Properties of Epoxy,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010).
  21. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani,  “ Low-Velocity Impact Behavior of Sandwich Composites with Neat and Nanophased Foam Core and Triaxial (0±45° and 0±60°) Braided Carbon Fiber Face Sheets, International Conference on Computational & Experimental Engineering and Sciences, ICCES10, Las Vegas, March 29-April 2, 2010.
  22. H. Mahfuz, F. Powell, R. Granata, M. Hosur, “Treatment of Carbon Fibers with POSS and Enhancement in Mechanical Properties of Composites,” Proceedings of the SAMPE ’10, the International SAMPE Symposium and Exhibition, Seattle, WA, USA, May 17-20 (2010). 

2009

  1. Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mahesh Hosur and Shaik Jeelani, “Mechanical and Thermal Characterization of CNF-Filled Polyester Nanophased Composite,” International Conference of Mechanical Engineering, Dakha, Bangladesh, December 26-28, 2009.
  2. Gregory Strawder, Mahesh Hosur, Jeelani, and Yuanxin Zhou, “Thermal and Mechanical Studies of Wood Flour Reinforced Polyurethane Composites,” ASMPE Fall Meeting, Wichita, Kansas, October 19-21, 2009.
  3. Dangale C. Robinson Meda, Mahesh V. Hosur, and Shaik Jeelani, “Process Optimization and Characterization of Nanoclay Infused Polyurethane Foam,” The 1st joint American- Canadian International Conference on Composites September 17, 2009.
  4. Yuanxin Zhou, M S. Shaik, Shaik Jeelani, Thomas E. Lacy, “Fabrication and Characterization of Vapor Grown Carbon Nanofiber Reinfirced Polyester,” American Society for Composites 2009 Annual Technical Conference, Newark, DE, USA, September 15, 2009.
  5. Mohammad K. Hossain, Muhammad E. Hossain, Mahesh Hosur, and Shaik Jeelani, “Comparison of Low Velocity Impact Behavior of Conventional Glass-Polyester and CNF-Filled Glass Polyester Nanophased Composites,” The 1st joint American- Canadian International Conference on Composites September 16, 2009.
  6. S. Zainuddin, M. V. Hosur, R.Barua, and A. V. Anafo, Ashok Kumar and S. Jeelani, “Effects of Ultraviolet Radiation and Condensation on Static and High Strain Rate Behavior of Nanophased Glass/ Epoxy Composites,” The 1st joint American- Canadian International Conference on Composites September 16, 2009.
  7. Jessie B. Mayo, Mahesh V. Hosur, and Shaik Jeelani, Eric D. Wetzel “Cut Behavior of High Performance Fibers,” The 1st joint American- Canadian International Conference on Composites September 17, 2009.
  8. Yuanxin Zhou, M.S. Shaik, Shaik Jeelani ,Thomas Lacy, Mark F. Horstemeyer, “Experimental Study on Thermal and Mechanical Properties of Clay Modified Carbon Fiber Reinforced epoxy,” American Society for Composites 2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008.
  9. S. Akanda, Yuanxin Zhou, Shaik Jeelani, “Effect of Structure on Electrical conductance of Single Wall Carbon Nanotubes,” American Society for Composites 2008 Annual Technical Conference, Memphis, TN, USA, September 11, 2008.
  10. N Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of drug loaded iron oxide nanoparticles,” ICCM-17 17th International Conference on Composite Materials, 27 Jul 2009 - 31 Jul 2009, Edinburgh International Convention Centre (EICC), Edinburgh, UK
  11. T. Nelson, M. V. Hosur, S. Jeelani, “Development of Bio-Based, Hazardous Air Pollutant Free Sheet Molding Compounds,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 30, 2009.
  12. M. V. Hosur, Md. A Bhuiyan, S. Jeelani, “Low-Velocity Impact Response of Sandwich Composites with Nanophased Core,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.
  13. Vijaya K. Rangri, Mohammad S. Bhuyan, Shaik Jeelani, “Synthesis, Comparative Study of Thermal and Microwave cured Epon862/CNFs Nanocomposites,” ICCM-17 17th
  14. International Conference on Composite Materials 27 Jul 2009 - 31 Jul 2009, Edinburgh
  15. International, Convention Centre (EICC), Edinburgh, UK
  16. S. Zainuddin, M.V. Hosur, A. Kumar, S. Jeelani, “Durability Studies of Nanophased FRP Composites under synergistic exposure conditions,” International Conference on Composite Materials, ICCM-17, Edinburgh, UK, July 27, 2009.
  17. M. V. Hosur, Md. A. Bhuiyan, S. Jeelani, “Impact Response of Nanophased Foam Core/Braided Face Sheet Sandwich Composites,” 2009 Annual Society for Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009.
  18. H. Rao, M. V. Hosur, J. Mayo, S. Burton, S. Jeelani, “Stab Characterization of Hybrid Ballistic Fabrics,” 2009 Annual Society for Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009.
  19. S. Zainuddin, M. V. Hosur, A. Tcherbi-Narteh, Ashok Kumar and S. Jeelani,  “Dynamic Compression Response of Nanophased Composites Subjected to UV Radiation,” 2009 Annual Society for Experimental Mechanics Conference, Albuquerque, NM, June 1-4, 2009.
  20. T. Nelson, M. Hosur, S. Jeelani, A. Netravali, “Physical and Mechanical Characterization of Alkali Treated Kenaf Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
  21. V. K. Rangari, G. M. Mohammad, S. Jeelani, Y. U.Butenko,;  V. R. Dhanak, “Fabrication of Nylon Nano Diamond Coated MWCNT Composite Fibers,”  SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009
  22. V. Rangari, T. A. Hassan, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Calcium Carbonate Nanoparticles Derived from Eggshell,” SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009
  23. V. Rangari, N. W. Bolden, V. K. Rangari, S. Jeelani, “Synthesis and Characterization of Drug coated Magnetic Nanoparticles,” SAMPE ’09 Conference and Exhibition, Baltimore, Maryland, May 18-21, 2009
  24. L. Adiani, P. Subbarayan, S.Boyoglu, K. Vig, S. Pillai, V. Rangari, S.R. Singh, “Silver Coated Carbon Nanotubes Inhibit RSV Infection,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX
  25. K. Vig, S. Boyoglu, V. Rangari, S. Pillai, S.R. Singh, “Respiratory Syncytial Virus Inhibition by Gold and Titanium Nanoparticles,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX
  26. D. Ashour, P. Subbarayan, L. Adiani, S. Boyoglu, G. Mohammad, V. Rangari, S. Jeelani, S. Ram Singh, S. Pillai,  “Antimicrobial properties of silver coated CNT,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX,
  27. T.A. Hassan, V.K. Rangari, S. Jeelani, “Synthesis and Characterization of Calcium Silicate via mechanochemical and Sonochemical method,” Nanotech Conference & Expo, George R.Brown Convention Center, May 3-7, 2009, Houston, TX,
  28. M. E. Moore, M. Hosur, S. Jeelani, “Effect of Bromine Position on the Thermal Properties of Brominated Resole Phenolic Resins,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
  29. Yuanxin Zhou, Sajedur Akanda, Mahesh Hosur, Shaik Jeelani, “Atom Scale Simulation of Contact Resistance between Two Single-Walled Carbon Nanotubes,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
  30. Mahesh V. Hosur, Md. Mazedul Islam, Aziz Ahmed, Shaik Jeelani, “Low Velocity and High Strain rate Compression Response of Braided Carbon/Epoxy Composites,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
  31. J. Mayo, Jr., A. Lewis, M. V. Hosur, S. Jeelani, “Cut Studies of Brittle and Ductile Fibers,” SAMPE 2009 Conference, Baltimore, MD, May 2009.
  32. M. E. Moore, M. V. Hosur, A. G. Ludwick, and S. Jeelani, “Effect of Bromine Substitution and Position on the Thermal Stability and Thermal decomposition Kinetics of Brominated Resole Phenolic Resins,” American Chemical Society Conference 2009, Salt Lake City, UT, March 2009
  33. Vijaya K. Rangari, Mohmmad S. Bhuyan and Shaik Jeelani, “Synthesis, Thermal and Mechanical characterization of Microwave cured Epoxy/CNTs nanocomposites,” ICCST/7 – Seventh International Conference on Ccomposite Science and Technology  Jan, 20-22, 2009 - SHARJAH, UNITED ARAB EMIRATES 
  34. Sirajus Salekeen, M.G.Kibria Khan, Mahesh Hosur, and Shaik Jeelani, “Ballistic Properties for Nano-Infused Epoxy Composite/Ceramic Armor,” International Conference on Composites Science and Technology, Sharjah, UAE, Jan 21, 2009. 

2008

  1. Mahesh Hosur, Merlin Theodore, Shaik Jeelani, “Effect of Functionalization on the Morphology, Cure Kinetics and Mechanical Behavior of Thermosetting Polymers,” Proceedings of the IUTAM-MMSS2008 Symposium on Multifunctional Materials, Structures and Systems, December 10-12, 2008, Bangalore, India.
  2. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and Performance of Nanophased Braided Carbon/Epoxy Composites,” Proceedings of the 2nd International Symposium on Advanced Materials and Polymers for Aerospace and Defense Applications (SAMPADA-2008), December 8-12, 2008, Pune, India.
  3. Vijaya K. Rangari, Mohmmad S. Bhuyan   and Shaik Jeelani, “Microwave processing and charactering of Epoxy 862/CNT nanocomposites,” SAMPADA-2008, Dec 8th 12, University of Pune, India
  4. Vijay K. Rangari, M.Yousuf, M.Ghouse and Shaik Jeelani, “Thermal and mechanical characterization of polymer nanocomposites of Si3N4/ Polypropylene fibers,” ISAMPE National Conference on Composites : INCCOM-7, National Aerospace Laboratories, Bangalore-17 (NAL’s Golden Jubilee Year 2008-09)
  5. Mahesh V. Hosur, Tamanna Rahman, Sandrea Brundidge-Young, and Shaik Jeelani, “Mechanical and Thermal Properties of Amine Functionalized Multi-walled Carbon Nanotubes Epoxy Based Nanocomposite,” Proceedings of the Second International Conference on Polymer Blends, Composites, IPNs, Membranes, Poly Electrolytes and Gels, Macro to Nano Scales (ICBC-2008), September 22-24, 2008, Kottayam, Kerala, India.
  6. Mahfuz, H. and Khan, M., “Synthesis and Characterization of Low Density Polyethylene (LDPE) Reinforced with Functionalized CNTs,” ASME International Mechanical Engineering Congress and Exposition, October 31 – November 6, 2008, Boston, Massachusetts, Presented and published in the Conference Proceedings.
  7. Md. A. Bhuiyan, Mahesh Hosur, Yaseen Farooq, Shaik Jeelani, “Mechanical and Thermal Properties of Carbon-Nanofiber Infused Polyurethane Foam,” ASME IMECE, Nov. 2008, Boston, MA.
  8. Mary E. Moore, Mahesh Hosur, Adriane G. Ludwick, and   Shaik Jeelani, “Preparation and Characterization of Layered Silicate Nanocomposites Based on Resole Phenolic Resins and Brominated Resole Phenolic Copolymer Resins,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
  9. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Characterization of neat and nanophased epoxy polymers subjected to accelerated aging conditions,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
  10. Tiffany Nelson, Mahesh Hosur, John LaScala, Shaik Jeelani, “Synthesis and Characterization of Modified Soybean Oil and Methacrylated Fatty Acid Derived Resins for Sheet Molding Compounds,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
  11. S. Zainuddin, M. V. Hosur, Y. Zhou, Ashok Kumar and S. Jeelani, “Durability Study of Neat/ Nanophased GFRP Composites Under Different Environmental Conditioning,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
  12. B. Dey, Yuanxin Zhou, Mahesh Hosur,  Shaik Jeelani, Ashok Kumar, L. D. Stephenson, “Evaluation of Thermal Effects on Mechanical Properties of Epoxy, Carbon Fiber and Carbon/epoxy Composite,” CD Proceedings of the Annual technical Conference of American Society for Composites, Sept. 9-11, 2008, Memphis, TN.
  13. Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Processing and Performance of Nanoclay Infused Low Density Polyurethane Foams,” CD Proceedings of the Fall Meeting of the Society for Advancement of Materials and Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.
  14. Harish M Rao, Jessie Mayo. Jr., Mahesh V. Hosur, and Shaik Jeelani, “Stab Characterization of Ballistic Fabrics Impregnated With Shear Thickening Fluid,” CD Proceedings of the Fall Meeting of the Society for Advancement of Materials and Process Engineering (SAMPE), Sept. 9-11, 2008, Memphis, TN.
  15. Vijaya K. Rangari, Ghouse, M. Mohammal , Shaik Jeelani, Komal Vig,  Seyhan Boyoglu,  Shree Ram Singh, and Shreekumar Pillai, “Synthesis of Nylon/CNT/Ag fiber for antimicrobial textile applications,” Force Health Protection -- Prevention is the Key, 11th Annual Force Health Protection Conference, Albuquerque Convention Center Albuquerque, New Mexico 9 - 15 August 2008,
  16. V.K.Rangari, M.Y.Shaik, and S. Jeelani, “Characterization of nanocomposite materials using electron microscopy,” Microscopy & Microanalysis 2008 Meeting, August 3-7, 2008, Albuquerque Convention Center, Albuquerque, New Mexico
  17. S. Boyoglu, K. Vig, V. Rangari, S. Pillai, V. Dennis, S.R. Singh, “Evaluation of Nanoencapsulated DNA Vaccine for RSV,” NSTI, Nanotech June 1-5,  Boston-2008,
  18. K. Vig, S. Boyoglu, V. Rangari, L. Sun, A. Singh, S. Pillai, S.R. Singh,” Use of Nanoparticles as Therapy for Respiratory Syncytial Virus Inhibition,” NSTI, Nanotech June 1-5,  Boston-2008,
  19. W.D. Jones, V.K. Rangari, S. Jeelani, “Thermal and Mechanical Response of POSS coated Nanophased expandable foam core materials,” NSTI, Nanotech June 1-5,  Boston-2008,
  20. V.K. Rangari, S. Dey, S. Jeelani, “In-situ synthesis of Cu nanoparticles on MWCNTS using Microwave irradiationm,” NSTI, Nanotech June 1-5,  Boston-2008,
  21. N. Wright Bolden, V. Rangari, S. Jeelani, “Synthesis of magnetic nanoparticles and its applications in drug delivery systems,” NSTI, Nanotech June 1-5,  Boston-2008,
  22. Vijaya  K. Rangari  G. M. Mohammad, S. Jeelani, “Fabrication of Nylon nanocomposite fibers for Antimicrobial Textile applications,” The 2nd International Conference on Heterogeneous Materials Mechanics (ICHMM-2008) June 3-8, 2008 Huangshan, China
  23. Mahesh Hosur, Farhan Chowdhury, Orion Gebremedhin, Shaik Jeelani, “Recent Advanced on the Effect of Nanoclay on the Properties of Epoxies and Fiber Reinforced Polymer Composites,” Second International Conference on Heterogeneous Materials Mechanics, June 5, 2008, Huangshan, China.
  24. Vijaya K. Rangari, Tarig A. Hassan and Shaik Jeelani, “Synthesis and Mechanical Properties of Shear Thickening Fluid/Kevlar Composite for Body Armor Application,” SAMPE '08  Long Beach, Material and Process Innovations: Changing our World, May 16-21, 2008
  25. Y. X. Zhou, B. Dey, M.V. Hosur, S. Jeelani, A. Kumar, and L. D. Stephenson,  “Effect of degraded Matrix on the Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Epoxy,” Proceedings of the International Conference of Computational and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008, Honolulu, HI.
  26. M. V. Hosur, M. M. Islam, S. Jeelani, “Low-Velocity Impact of Braided Carbon/Epoxy Composites,” Proceedings of the International Conference of Computational and Experimental Engineering and Sciences, ICCES’08, March 15-21, 2008, Honolulu, HI. 

2007

  1. Vijaya K. Rangari, Fredrick Baker, Tarig A. Hassan and Shaik Jeelani, “Thermal and Mechanical Properties of SiC/SiO2 Epoxy Nanocomposite,” CANCOM-2007, Winnipeg, Canada.
  2. Vijaya K. Rangari, Tarig A. Hassan, Quentin Mayo and Shaik Jeelani, “Effect of ultrasound on tungsten oxide nanoparticles and its applications in epoxy nanocomposites,”  ICCM-16-2007, Kyoto, Japan.
  3. Vijay K. Rangari*, M.Yousuf and Shaik Jeelani, “Filament extrusion process, thermal and mechanical characterization of nylon6-and Silicon carbide coated Silicon nitride nanoparticle,” Proceedings of International and  INCCOM-6 Conference Future Trends in Composite Materials and Processing, December 12-14, 2007, Indian Institute of Technology Kanpur, India.
  4. Mahesh V. Hosur, Orion Gebremedhin, Shaik Jeelani, “Processing and Performance Evaluation of Epon 828,” CD Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 11-15 November 2007, Seattle, WA.
  5. Sandrea B. Young, Merlin Theodore, Mahesh V. Hosur, Shaik Jeelani “Characterization of Amine Functionalized Multi-Walled Carbon Nanotubes Epoxy-Based Nanocomposites,” CD Proceedings of the SAMPE Fall Meeting, October 29-November 1, 2007,Cincinnati,  OH.
  6. Wanda D. Jones, Vijaya K. Rangari and Shaik Jeelani, “Mechanical and Thermal Properties of Epoxy based Composites with POSS modified Carbon Nanotubes,” SAMPE- Oct 29th – 1 Nov. 2007.
  7. Jessie Mayo B. Jr., Mahesh V. Hosur, Shaik Jeelani “Dynamic and Quasi-Static Stab Resistance of Thermoplastic and Silica-Polyethylene Glycol Gel Infused Fabrics,” CD Proceedings of the 22nd Annual Technical Conference of the American Society for Composites, September 17–19, 2007, Seattle, WA.
  8. Rodgers, R., Mahfuz, H., Rangari, V., Jeelani, S., Carlsson, L, “ Tensile Response of SiC-Nanoparticles Reinforced Epoxy Composites at Room and Elevated Temperatures,” 16th Intl. Conference on Composite Materials (ICCM-16), Kyoto, Japan, July 8-13, 2007, Paper presented and published in the CD Proceeding..
  9. Dangale C. Robinson, Mahesh V. Hosur, Shaik Jeelani, “Process Optimization and Characterization of Low Density Polyurethane Foam,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.
  10. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani “Characterization of Epon 862 Reinforced With Functionalized MCNT's,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.
  11. Mahesh V. Hosur, Aleem A. Mohammed, Shaik Jeelani, “Impact Response of Nanophased Polyurethane Foam Core Sandwich Composites,” CD Proceedings of the 16th International Conference on Composite Materials, July 8-13, 2007, Kyoto, Japan.
  12. M. V. Hosur, J. B. Mayo Jr., E. Wetzel, and S. Jeelani, “Studies on the Fabrication and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites,” CD Proceedings of the International Conference on Materials for Advanced Technologies – ICMAT-2007, July 1-6, 2007, Singapore.
  13. O. Gebremedhin, M. V. Hosur, J. Thomas, S. Jeelani, “Processing and Performance of Nanoclay infused EPON-828,” CD Proceedings of the SAMPE 2007, June 4-8, 2007, Baltimore, MD.
  14. Wanda D. Jones, Vijaya K. Rangari and Shaik Jeelani, “Decoration of carbon nanotubes with magnetite nanoparticles and its applications in polymer composites,” SAMPE-2007, Baltimore, June 7.
  15. M. Theodore, M. V. Hosur, J. Thomas, S. Jeelani, “Effect of functionalization on the properties of multi-walled carbon nanotubes,” CD Proceedings of the SAMPE 2007, June 4-8, 2007, Baltimore, MD.
  16. Vijaya K. Rangari, Tarig A. Hassan and Shaik Jeelani, “Synthesis and Characterization of Shear Thickening Fluid for Body Armor applications,” SAMPE-2007, Baltimore, June 7.
  17. Clements, F., Mahfuz, H. and Wetzel, E., “M50V50A50 Method for Characterizing Stab Resistant Materials for Body Armor Applications,” SEM 2007, Springfield, Massachusetts, June 3-6, 2007, Paper presented and published in the CD proceeding Vijaya K. Rangari, Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium Carbide Infused Phenolic Balsa Foam Nanocomposite,” Plasticity 2007: Alyeska (Alaska), June 2-6, 2007.
  18. M. Theodore, M. V. Hosur, J. Thomas, and S. Jeelani, “Processing and Characterization of Epon 862 reinforced with functionalized MWCNT’s,” 2007 NIST Nanotechnology Conference and Trade Show, May 20-24, 2007, Santa Clara, California, U.S.A.
  19. Yuanxin Zhou, Everett White, Shaik Jeelani, “Effect of particle size on the mechanical properties of polymer matrix nanocomposite,” Nanotech 2007, Santa Clara, CA, USA, May 22, 2007
  20. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani, “Nonlinear constitutive equation for vapor-grown carbon nanofiber-reinforced SC-15 epoxy at different strain rate,” ANTECH 2007, Cincinnati, OH, USA,  May 8, 2007
  21. J. Mayo, M. V. Hosur, E. Wetzel, S. Jeelani, “Resistance of Novel Thermoplastic-Kevlar Composites to Spike Penetration,” 2nd International Conference on recent advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India.
  22. M. V. Hosur, A. A. Mohammed, S. Jeelani, “Impact Response of the Nanophased Foam Core Sandwich Composites,” 2nd International Conference on recent advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India.
  23. M. V. Hosur, S. Krishnamoorthy, S. Jeelani, “Processing and Mechanical Performance of Woven Fabric Carbon/Polyimide Composites,” 2nd International Conference on recent advanced in composite materials, Feb. 20-23, 2007, New-Delhi, India.
  24. M. V. Hosur, F. H. Chowdhury, S. Jeelani, “Impact Performance of Nanophased Woven Fabric Carbon/Epoxy Composite Laminates,” International Conference on Computational and Experimental Engineering and Sciences, ICCES’07, January 3-8, 2007, Miami, FL. 

2006

  1. Saha, M.C., Nilufar, S., and Jeelani, S., " Studies on Processing and Characterization of Hollow Glass Microballoons Filled Composites," 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-10, 2006.
  2. Saha, M.C., Kabir, M.E., and Jeelani, S., "Effect of Nanoparticles on Mode-I Fracture Toughness," 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-10, 2006.
  3. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Processing and Low-Velocity Impact Performance of Nanophased Woven Carbon/Epoxy Composite Laminates," U.S Japan Conference on Composite Materials, Dearborn, Michigan, Sept. 20-22, 2006.           
  4. Robinson, D.C., Hosur M.V., and Jeelani, S., "Process Optimization and Characterization of Low Density Polyurethane Foam," Proceedings of the 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI, Sept. 17-20, 2006.
  5. Saha, M.C., Nilufar, S., and Jeelani, S., " Processing and Performance Evaluation of Syntactic Foams Infused with Nanoclay," 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI, Sept. 17-20, 2006
  6. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Studies on Flexural and Thermal Response of Hand-layup Carbon/SC-15 Epoxy Composites," SEM Annual Conference & Exposition on Experimental and Applied Mechanics, St. Louis, Missouri, June 5- 7, 2006.
  7. Saha, M.C., Kabir, M.E., and Jeelani, S., "Core/Skin Debond Fracture Toughness of S2-Glass/Epoxy Sandwich Composites with Nanophased Polyurethane Foam," SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006.
  8. Saha, M.C., Nilufar, S., and Jeelani, S., "Effect of Strain Rate on Compressive Behavior of Syntactic Foam," 2006 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Saint Louis, Missouri, June 4-7, 2006.
  9. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., "Fracture and Fatigue behavior of carbon nano fiber reinforced epoxy,” Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. Saint Louis, Missouri, USA. June 4-7, 2006.
  10. Hosur, M.V., Chowdhury, F.H., Mohammed A.A., and Jeelani, S., "Studies on the Processing and Performance of Nanocomposites for Structural Applications," 23rd Southeastern Conference in Theoretical and Applied Mechanics Mayagüez, Puerto Rico, May 21 - 23, 2006.
  11. Saha, M.C., Nilufar,S., and Jeelani, S., "Manufacturing and Characterization of Hollow Spheres Filled Epoxy Composites," Twenty Second Southeastern Conference on Theoretical and Applied Mechanics, Puerto Rico, May 21-23, 2006.
  12. Chowdhury, F.H., Hosur, M.V., and Jeelani, S., "Fabrication and Characterization of Plain Weave Carbon/Nanoclay-Epoxy Composites," SAMPE 2006, April 30-May 4, 2006, Long Beach, CA.
  13. Farhana, F., Zhou, Y., Rangari, V., Jeelani, S.; "Fabrication and characterization of carbon-CNF-epoxy nanocomposite,” SAMPE 2006, April 30-May 4 2006, Long Beach CA.
  14. Hasan M. M.; Zhou, Y., Mahfuz, H., and Jeelani, S.; "Effect of SiO2 nano-particle on tensile behavior of Nylon 6 at different strain rate,” SAMPE 2006, April 30-May 4 2006, Long Beach CA.
  15. M. R. Parker, Y. Dwivedi, T. Al- Saadi, S. Zainuddin, H. Mahfuz, V. K. Rangari, S. Jeelani, “ Enhancement of mechanical properties of epoxy- based nanocomposites using high magnetic fields”, ICM Conference, Scotland, 2006. 

2005

  1. Hosur, M.V., Chowdhury, F.H., and Jeelani, S., "Enhancement of Thermal and Mechanical Properties of Woven Carbon/Epoxy Composites through Nanoclay," International Conference on Computational and Experimental Engineering and Sciences, ICCES'05, Chennai, India, December 1-6, 2005.
  2. Robinson, D., Hosur, M., Mahfuz, H., Rangari, V. K., Jeelani, S., "Optimization of Ultrasonic Parameters & Manufacturing Process and Characterization of Nano-phased Low Density Polyurethane Form,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
  3. Pervin, F.; Zhou, Y.; Rangari, V.K.; Jeelani, S.; "Evaluation of Thermal and Mechanical Properties of Carbon Nano Fiber Reinforced SC-15 epoxy,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
  4. Zhou, Y., Mao, P., Uddin M. F., Jeelani, S.; "High Strain rate Tensile Behavior of Carbon Fiber Reinforced Aluminum Laminates,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
  5. Hosur, M., Mohammed, A., Jeelani, S., "Processing and Performance of Polyurethane/nanoclay Nanocomposite Foams,” 2005 ASME International Mechanical Engineering Congress, Orlando, Florida, November 4-10, (2005).
  6. Zhou, Y.; Baseer, M. A.; Mahfuz, H., and Jeelani, S.; "Numerical Simulation on Tensile Failure process of Unidirectional Carbon Prepregs with Different Matrix,” Proceedings of the 20th Annual Technical Conference of the American Society for Composites, September 7-9, (2005), Philadelphia, PA.
  7. Pervin, F.; Zhou, Y.; Biswas, M.A.; Rangari, V.K.; Jelanee, S.; "Fabrication and Characterization of Clay / Epoxy Nanocomposite,” CD Proceeding of 5th Annual Automotive Composites Conference and Exhibition, September 12-14, (2005), Tory, MI.
  8. H. Mahfuz, S. Zainuddin, M. F. Uddin, V.K. Rangari, S. Jeelani, M. R. Parker, T. Al- Saadi, “Response of magnetically flocculated nanophased composites under dynamic loading”, American Society for Composites, Philadelphia, PA, 2005.
  9. H. Mahfuz, S. Zainuddin, M. R. Parker, T. Al-Saadi, “Improvements in high specific strength epoxy-based composites using high magnetic fields”, Nanotech, Anaheim, CA, 2005.
  10. H. Mahfuz, S. Zainuddin, V. K. Rangari, S. Jeelani, M. R. Parker, T. Al-Saadi, “Infusion of carbon nanotubes and carbon nanofibers into SC-15 epoxy; An investigation of the influence of high magnetic fields”, SAMPE, Anaheim, CA, 2005.
  11. Mohammed Farid Uddin, Hassan Mahfuz, Shaik Zainuddin, Shaik Jeelani, “Anisotropic behavior of rigid polyurethane foam with acicular nanoparticles infusion under high strain rate”, American Society of Composites, Philadelphia, PA, 2005.
  12. M. F. Uddin, H. Mahfuz, S. Zainuddin, S. Jeelani, "Infusion of spherical and acicular nanoparticles into polyurethane foam and their influences on dynamic performances”, Society of Experimental Mechanics, Portland, OR, 2005.
  13. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Fabrication and Evaluation on Nano-Phased Unidirectional Carbon Fiber Reinforced Epoxy,” CD Proceeding of 5th Annual Automotive Composites Conference and Exhibition, September 12-14, (2005), Tory, MI.
  14. Zhou, Y.; Rangari, V.; Mahfuz, H.; Jeelani, S.; Mallick, P.K.; "Thermal and Mechanical Behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene Nanocomposites,” International SAMPE Symposium and Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, (2005), p 1655-1657, May 2005, Long Beach CA.
  15. Zhou, Y.; Baseer, M. A.; Mahfuz, H.; Jeelani, S.; "Experimental Study on the Fatigue Strength Distribution of T700 Carbon Fiber,” International SAMPE Symposium and Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, 2005, p 1625-1634, May (2005), Long Beach CA.
  16. Hosur, M. Mohammed, A., Jeelani, S. "Studies on the Synthesis and Characterization of Polyurethane/Nanoclay Nanocomposite Foams," 20th American Society for Composites Annual Technical Conference, September 7-9 (2005), Philadelphia, PA.
  17. Hosur, M., Jain, K., Jeelani, S., "Studies On The Low-Velocity Impact Response Of Carbon/Epoxy Composites Subjected To Environmental Conditioning," SAMPE 2005 Conference, Long Beach CA May 1-5, (2005). 

2004

  1. Salekeen, S., Rahman, M.M., Mahfuz, H., and Jeelani, S., "Long-term Creep and Creep Rupture Behavior of Woven Ceramic Matrix Composites at Elevated Temperatures," 2004 ASME International Mechanical Engineering Congress, Anaheim, California, November 13-19, (2004).
  2. Hosur, M. V., John, M. K., Menon, A., Rangari, V. K. and Jeelani, S. "Studies on the Microwave Curing and Characterization of SC-15 Epoxy Reinforced with ZnO Nanoparticles,” 19th Annual Technical Conference of the American Society for Composites, October 17-20(2004), Atlanta, GA.
  3. Baseer, M.A. Mahfuz, H., Rangari, V.J., Zhou, Y., and Jeelani, S." Evaluation of Thermal and Mechanical Properties of Nanophased Carbon Prepregs," American Society for Composites 19th Annual Tech. Conf., Atlanta, Georgia, October 17-20 (2004), Paper NT-22.
  4. Hosur, M. V., Abdullah, M. and Jeelani, S. "Fabrication and Low Velocity Impact Response of Innovative Foam Filled 3-D Integrated Core Sandwich Composites, 11th U. S. Japan Conference on Composite Materials, September 9-11 (2004), Yonezawa, Japan.
  5. John, K. M., Hosur, M. V., Rangari, V. K. and Jeelani, S. "On the Processability of Nanophased Composites using Microwave,” 22 Southeastern Conference on Theoretical and Applied Mechanics, SECTAM XXII, August 17(2004), Tuskegee, Alabama.
  6. Hasan M., Mahfuz, H., Rangari, V. and Jeelani, S., "Thermal and Mechanical Characterization of Nylon-6 Filaments Infused with Nanoparticles, Southeastern Conference on Theoretical and Applied SECTAM XXII, August 15-17(2004), Tuskegee, AL.
  7. Hosur, M. V., Abdullah, M. and Jeelani, S. "Response of Hollow and Foam Filled Integrated Core Sandwich Composites under Low Velocity Impact Loading,” International Conference on Advances in Structural Integrity, July 14-17 (2004), Bangalore, India.
  8. Hosur, M.V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Response of Satin Weave Graphite Epoxy Composites under Punch Shear Loading at Room and Elevated Temperatures,” International Conference on Advances in Structural Integrity, July 14-17(2004), Bangalore, India.
  9. Mahfuz, H., Uddin, M., Rangari, V., and Jeelani, S., “High Strain Rate Response of Sandwich Composites with Nanophased Cores," 2004 SEM X International Congress on Experimental and Applied Mechanics, Costa Mesa, California, June 7-10(2004).
  10. Hosur, M. V., Islam, W., Vaidya, U. K. and Jeelani, S. "Dynamic Punch Shear Characterization of Twill Weave Graphite/Epoxy Composites,” SAMPE 2004, Long Beach CA.
  11. Uddin, M., Saha, M., Mahfuz, H., Rangari, V. and Jeelani, S., "Strain Rate effects on Nanophased Polyurethane Foams," SAMPE 2004, May 16-20 (2004), Long Beach, CA.
  12. Salekeen, S., Nana, J., Mahfuz, H., and Jeelani, S., "Thermal Shock Behavior of Nicalon Fiber SiCN Ceramic Matrix Composites," SAMPE 2004, May 16-20 (2004), Long Beach, CA.
  13. Mahfuz, H., Baseer, M., Rangari, V., and Jeelani, S., "Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE 2004, May 16-20 (2004), Long Beach, CA.
  14. Hosur, M. V., Abdullah, M. and Jeelani, S. "Low Velocity Impact Characterization of Hollow Integrated Core Sandwich Composites,” SAMPE 2004, May 16-20, (2004), Long Beach, CA. 

2003

  1. Mahfuz, H., Ashfaq, A., Rangari, V., and Jeelani, S., "Characterization of Carbon Nanotube Reinforced Filaments and their Composites,” 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, November 15-21 (2003).
  2. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Dynamic Punch Shear Characterization of Woven Graphite/Epoxy Laminates,” ASME International Mechanical Engineering Congress and Exposition, Washington, D. C., November 15-21 (2003).
  3. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Evaluation of Dynamic Punch Shear Properties of Graphite/Epoxy Cross-Ply Laminates,” CD Proc. American Society for Composites, 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003).
  4. Mahfuz, H., Islam, M., Rangari, V. and Jeelani, S., "Processing Synthesis and Flexural Characterization of Nanophased Polyurethane Foams," American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 220.
  5. Mahfuz, H., Saha, M., Chakravarty, U. and Jeelani, S., "Energy Absorption at Various Strain Rates by Sandwich Core Materials - Analytical and Experimental Investigation," American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 227.
  6. Mahfuz, H., Ashfaq, A., Rangari, V., Jasiuk, I. and Jeelani, S., "Effects of Micron and Nanosized SiC Particles on the Mechanical Properties of Epoxy Nanocomposites,"  American Society for Composites 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 238.
  7. Gorenstein, N. Friedman, A., Mahfuz, H., Ashfaq, A., Rangari, V. and Jeelani, S., “Synthesis, Processing, and Mechanical Characterization of Epoxy-Protein Nanocomposites," American Society for Composites, 18th Annual Tech. Conf., Gainesville, Florida, October 19-22 (2003), Paper 240.
  8. Saha, M., Mahfuz, H., Joarder, C. and Jeelani, S., "Finite Element Analysis of Integral Sandwich Tee Joints under Tension," 10th International Conference on Composites/Nano Engineering, New Orleans, Louisiana, July (2003).
  9. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon Nano-whisker Reinforced Composites: Manufacturing and Characterization," 2003 SEM Annual Conference on Experimental and Applied Mechanics, Charlotte, NC, preprint 199, June 2-4, (2003).
  10. Hosur, M. V., Vaidya, U. K., Ulen, C., Mayer, A. and Jeelani, S. "Ballistic Impact Response of Woven Carbon/Epoxy Composites,” 48th International SAMPE Symposium, May 11-13(2003), Long Beach CA.
  11. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S.," Shear Fatigue Behavior of PVC Foams" 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 513-521.
  12. Mahfuz, H., Islam, S. and Jeelani S., "Flexural Response of Sandwich Composites with Nanophased Cores," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 213-226.
  13. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S., "Dynamic Compression of Foam Core Sandwich Composites," 6th International Conference on Sandwich Constructions (ICSC6), Fort Lauderdale, Florida, Vol. 1, April (2003), pp. 410-417.
  14. Hosur, M. V., Adya, M, Dutta, P. and Jeelani, S. "High Strain Rate Response of Woven Graphite/Epoxy Composites at Elevated Temperatures,” 44th AIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials Conference, Norfolk, VA, April (2003). 

2002

  1. Hosur, M. V., Adya, M., Vaidya. U. K. and Jeelani, S., “Response of Stitched Woven Carbon/Epoxy Composites under High Strain Rate Compression Loading,” SAMPE Technical Conference, Nov. 4-7, (2002), Baltimore, Maryland.
  2. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F. and Jeelani, S., “Innovative Manufacturing and Stability Analysis of Composite Skin-Stringer Assembly,” ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002).
  3. Mahfuz, H., Chakravarty, U., Saha, M. and Jeelani, S., "Microstructure, Density and Strain Rate Effects on Sandwich Core Materials," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002).
  4. Mahfuz, H., Hasan, ABM, Saha, M. and Jeelani, S., "Failure Prediction of Flip Chip Packages using Finite Element Technique," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002), Conference.
  5. Hosur, M., Myers, D., Vaidya, U. K., and Jeelani, S., "Studies on the Repair of Ballistic Impact Damaged S2-Glass/Epoxy Laminates," ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002).
  6. Islam, M., Mahfuz, H., Motuku, M., Saha, M., and Jeelani, S, "Manufacturing and Analysis of 3-D Woven Sandwich Composites under Compressive Loading with Acoustic Emission Monitoring," ASME Winter Annual Meeting, New Orleans, Louisiana, November (2002).
  7. Hosur, M. V., Myers, D, Vaidya, U. K. and Jeelani, S. "Studies on the Repair of Ballistic Impact Damaged S2-Glass/Epoxy Laminates," ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002).
  8. Hosur, M. V., Waliul Islam, S. M, Jeelani, S., Vaidya, U. K. and Dutta, P. "High Strain Compression Characterization of Graphite/Epoxy Composites at Room and Elevated Temperatures," ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002).
  9. M. V. Hosur, S. M. Waliul Islam, S. Jeelani, U.K. Vaidya, P. Dutta, "High Strain Compression Characterization of Graphite/Epoxy Composites at Room and Elevated Temperatures," ASME International Mechanical Engineering Congress and Exposition, New Orleans, LA, November (2002).
  10. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "On and Off-Axis High Strain Rate Compression Characterization of Affordable Woven Carbon/Epoxy Composites,” 17th Annual Technical Conference of the American Society for Composites, Purdue, IL, October 20-23, (2002).
  11. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S.," Static and Dynamic Characterization of Polymer Foams under Shear Loads," CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No. 2013.
  12. Thomas, T., Mahfuz, H., Kanny, K., Jeelani, S.,  "High Strain Compression of Cellular Foam Core Sandwich Composites at Sub-ambient Temperatures,” CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No. 2012.
  13. Majumdar, P., Mahfuz, H., Saha, M., Shamery, F., Jeelani, S., and Thomas, M .M. "Composite Skin-Stringer Assembly: Innovative Manufacturing and Stability Analysis." CD Proc. American Society for Composites 17th Annual Tech. Conf., West Lafayette, Indiana, 21-23 October (2002), Paper No.183.
  14. Hosur, M. V., Karim, M. R. and Jeelani, S. "Studies on Stitched Woven S2 Glass/Epoxy Laminates Under Low and Ballistic Impact Loading,” Southeastern Conference on Theoretical and Applied Mechanics, (SECTAM XXI), May 19-21, (2002), Orlando, FL.
  15. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S "Characterization Of Affordable Satin Weave Carbon/Epoxy Laminate Composites Under Dynamic Compression Loading,” Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XXI), May 19-21, (2002), Orlando, FL.
  16. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Effects of Loading Frequency on the Fatigue Behavior of Sandwich Composites,” Developments in Theoretical and Applied Mechanics, Vol. 11(2002), pp. 285-294.
  17. Kulkarni, N., Mahfuz, H., Carlsson, L. and Jeelani, S. "Flexural Fatigue Characterization of PVC Foam Core Sandwich Composites,” Developments in Theoretical and Applied Mechanics, Vol. 11(2002), pp.295-304.

2001

  1. Hosur, M. V., Alexander, J., Vaidya, U. K. and Jeelani, S. "Off-Axis High Strain Compression Response of Carbon/Epoxy Laminates,” Proceedings of the 16th Annual Technical Conference of the American Society for Composites, Blacksburg, VA, September 9-12 (2001).
  2. Hosur, M. V., Adya, M., Vaidya, U. K., Mayer, A. and Jeelani, S "Characterization of Affordable stitched Plain Weave Carbon/Epoxy Composites under Impact Loading,” Thirteenth International Conference on Composite Materials ( ICCM-!3), June 25-29 (2001), Beijing China.
  3. Motuku, M., Vaidya, U. K., Rogers, R. and Jeelani, S. "Static Compression and High Strain Rate Impact Response of Foam Core Sandwich Composites,” International Conference on Composite Materials (ICCM-13), Paper ID-1569, Beijing, China, June 25-29 (2001).
  4. Hosur, M. V., Alexander, J., Adya, M., Vaidya, U. K. and Jeelani, S. Impact Response of Affordable Graphite/Epoxy Woven Fabric Composites,” 42ndAIAA/ASME/ASCE/ASC Structures, Structural Dynamics and Materials Conference, Seattle, WA, 16-19 April (2001).
  5. Hosur, M. V., Adya, U., Vaidya, U. K. and Jeelani, S. "Impact Resistance of Stitched Affordable Woven Carbon/Epoxy Composites,” ASME International Mechanical Engineering Congress and Exposition, New York, NY, November (2001).
  6. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Flexural Fatigue of PVC Foams,” 2001 ASME International Mechanical Engineering Congress, AMD-Vol. 248, pp. 39-49.
  7. Mahfuz, H., Mamun, W.  and Jeelani, S. "Recent Advances in Understanding the Response of Composite Materials at Higher Rates of Strain," Keynote Paper, 4th International Conference on Mechanical Engineering (ICME 2001), Vol. 1., pp. 57-65.
  8. Mahfuz, H., Muneeruzzaman, M., Zaman, K., Kulkarni, N. and Jeelani, S. "Response of Advanced Composites under Cyclic Loading; Recent Advances in Numerical and Experimental Approaches," Keynote Paper, BSME-ASME International Conference on Thermal Engineering, (2001), Vol. 1. pp. 120-132. 

2000

  1. Hosur, M. V., Alexander, J, Jeelani, S. and Vaidya, U. K. "High Strain Rate Compression Response of Carbon/Epoxy Laminate Composites," ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November (2000).
  2. Hosur, M. V., Karim, M. R., and Jeelani, S. "Influence of Stitching on The Low-Velocity Impact Response of Woven S2-Glass/SC-15 Epoxy Composites" ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, November (2000).
  3. Hosur, M. V., Vaidya, U. K., Abraham, A., Caroll, A. and Jeelani, S. "Comparison of Low-Velocity Impact Response of S2-Glass / SC-15 Epoxy Composites Manufactured by Low-Cost VARIM And RIT Techniques,” 15th annual Conference of American Society of Composites, College Station, TX, USA, Sept. 25-27 (2000).
  4. Hosur, M. V., Vaidya, U. K., Alexander, J. and Jeelani, S. "High Strain Rate Response of Affordable Woven Graphite/Epoxy Composite Laminates," 7th International Conference on Composites Engineering, ICCE/7, Denver, CO, USA July 2-8 (2000).
  5. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S.  "Studies on the Influence of 3D Reinforcement of S2-Glass/Vinyl Ester Composites Under Low-Velocity Impact Fatigue Loading,” 20th Southeastern Conference on Theoretical and Applied Mechanics, (SECTAM-XX), Callaway Gardens, Pine Mountain, GA, USA, April 16-18 (2000).
  6. Vaidya, U. K., Rogers, R., Hosur, M. V., Mahfuz, H. and Jeelani, S." Influence of Face Sheet Thickness and Core Density on the Impact Response of Foam Core Sandwich Composites,” 20th Southeastern Conference on Theoretical and Applied Mechanics (SECTAM-XX), Calloway Gardens, GA, April 16-18 (2000).
  7. Mahfuz, H., Mamun, W., Vaidya, U. K., Haque, A. and Jeelani, S. "Response of Foam-Core Sandwich Composites at High strain Rate," Developments in Theoretical and Applied Mechanics," Vol. 20 (2000), pp. 1-7.
  8. Motuku, M., Vaidya, U. k., Janowski, G. M., Basappa, G. and Jeelani, S. "Effect of Impact Velocity and Impactor Mass on the Low Velocity Impact Response of Liquid Molded VE 350 Resin and Fiber Reinforced Plaques,” ASME/IMECE'2000, Symposium on CAE and Related Innovations for Polymer Processing, MD-Vol. 90, pp. 117-138.
  9. Motuku, M., Rogers, R., Jeelani, S. and Vaidya, U. K. "Effect of Foam Core Density and Face Sheet Thickness on the Low Velocity Impact Response of Foam Core Sandwich Composites,” ASME/IMECE'2000, Symposium on Vibration and Noise Control with Multi-Functional Materials, NCA-Vol.27. pp. 435-446.
  10. Mahfuz, H, Zhu, Y., Mamun, W., Haque, A. and Jeelani, S. "Failure Analysis of Hybrid Armor Under High Velocity Impact," ASME 2000, AMD-Vol. 243, Dynamic Failure in Composite Materials and Structures, pp. 115-127.

1991-1999

  1. Hosur, M. V., Vaidya, U. K., Abraham, A., Basappa, G. and Jeelani, S. "Studies on the influence of through-thickness stitching on low-velocity and high strain response of S2-Glass/Vinyl Ester Composites,” ASME International Mechanical Engineering Congress and Exposition, AM-9A, Nashville, Tennessee, November, (1999).
  2. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M., Kulkarni, R. and Jeelani, S, "Evaluation of Ballistic Impact damage of Fiber Reinforced Plastic Laminates Bonded by Polycarbonate Face sheet" ASME International Mechanical Engineering Congress and Exposition, pp. 301-312, Nashville, Tennessee, November, (1999).
  3. Vaidya, U. K., Abraham, A, Hosur, M. V. and Jeelani, S. "Manufacturing and Impact Response of S2-Glass/Epoxy Composites Produced by Low-Cost Vacuum Assisted RTM and Resin Liquid Infiltration,” 1st International SAMPE Automotive Conference, September 27-29 (1999), Detroit, MI.
  4. Vaidya, U. K., Hosur, M. V., Earl, D., Cloyd, J. M., Rodgers, R. M. and Jeelani, S. "Impact Response of Integrated Hollow Core Sandwich Composite Panels,” 14th Technical Conference of American Society for Composites, September 27-29 (1999), Dayton, Ohio, PP. 404-413.
  5. Hosur, M. V., Vaidya, U. K., Jeelani, S. Jones, S., Eduljee, R. and Gillespie, J. "Activity Based Cost Modeling of Liquid Molding Processing Techniques for Thick Section Composites,” American Society for Composites, 14th Technical Conference, September 27-29(1999), Dayton, OH, pp. 968-977.
  6. Hosur, M. V., Vaidya, U. K., Gillespie, J. and Jeelani, S. "Ultrasonic Evaluation of Low-Velocity and Ballistic Impact Damage in S2-Glass Impact damage in S2-Glass/Vinyl Ester laminates,” 26th Annual Review of Progress in Quantitative Nondestructive Evaluation, July 25-30, (1999) Montreal, Quebec, Canada
  7. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A. and Jeelani, S. "Influence of Specimen Thickness on the High Strain Rate Impact Response of VARTM Woven S2-Glass/Vinyl Ester Composites,” 6th International Conference on Composites Engineering (ICCE-6), June 27-July 3 (1999), Orlando, FL.
  8. Vaidya, U. K., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. "Impact Response of Innovative Sandwich Composites in Low, Intermediate Velocity and High Strain Rate Scenarios,” International Conference on Composite Materials (ICCM-12), July 6-10 (1999), Paris, France.
  9. Mahfuz, H., Zhu, Y., Haque, A. and Jeelani, S.  "Response of Integral Armor under High Velocity Impact - An Experimental and Finite Element Study," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10 (1999). 
  10. Mahfuz, H., Pal, A., Rahman, M. and Jeelani, S.  "Failure Analysis of Thick Composite Rings under Diametric Compression," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 6-10, (1999).
  11. Mahfuz, H., Rahman, M., Vaidya, U. K., Haque, A. and Jeelani, S. "Effect of Rib Geometry on the Buckling Behavior of Composite Isogrid Cylinders," 12th International Conference on Composite Materials (ICCM-12), Palais Des Congress, Paris, July 5-9 (1999), Presented and Accepted for Publication.
  12. Vaidya, U. K., Jadhav, N., Hosur, M. V., Mahfuz, H. and Jeelani, S. "High Strain Rate Response of Resins Used in Vacuum Assisted Resin Transfer Molding,” Proceedings of the International Conference on Composite Materials (ICCM-12), Paris, France, July 5-9 (1999).
  13. Vaidya, U. K., Jadhav, N. C., Hosur, M. V., Mahfuz, H., Mohammad, H. and Jeelani, S. "Parametric Dielectric Sensing Studies in Vaccum Assisted Resin Transfer Molding,” Proceedings of the International Conference on Composite Materials (ICCM-12), Paris, France, July 5-9 (1999).
  14. Vaidya, U. K., Mohan, P. K., Hosur, M. V., Mahfuz, H., Haque, A. and Jeelani, S. " Impact Response of Innovative Sandwich Composites in Low, Intermediate Velocity and High Strain Rate Scenarios,” Proceedings of the International Conference on Composite Materials (ICCM-12), Paris, France, July 5-9 (1999).
  15. Vaidya, U. K., Hosur, M. V., Kumar, P., Mahfuz, H., Haque, A. and Jeelani, S. " Impact Damage Resistance of Innovative Functional Sandwich Composites,” Symposium on Recent Developments in the Study of Impacts on Composite Materials, ASME 1999 Mechanics and Materials Conference, Blaksburg VA, June 27-30(1999).
  16. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. " High Strain Rate Impact Response of Infusible Neat Resins and VARTM S2-Glass Reinforced Fabric Composite,” 1999 SAMPE Technical Conference: Advanced Materials and Processes Preparing for the New Millennium, Vol. 31, pp.89-100, Covina, CA.
  17. Vaidya, U. K., Jadhav, N., Hosur, M. V.,  Mahfuz, H. and Jeelani, S. "Parametric Dielectric Sensing Studies in Vacuum Assisted Resin Transfer Molding," 6th  International Conference on Composites Engineering (ICCE - 6), Orlando, Florida, Vol. 1, June 27 - July 3 (1999), pp. 857-858.
  18. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Life Prediction of Thick-Section Woven Composites Under Flexural Loading," 6th International Conference on Composites Engineering (ICCE - 6), Orlando, Florida, Vol. 1, June 27 - July 3, (1999), pp. 537-538.
  19. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S.  "Response of Fiber and Matrix in Composites under High Strain Rate Loading," Proceedings of the SEM Annual Conference on Theoretical, experimental and Computational Mechanics, Vol. 1, June 7-9(1999), pp. 559-564.
  20. Mahfuz, H., Zaman, K., Haque, A., Vaidya, U. K. and Jeelani, S. "S-N Characterization and Cyclic Life Prediction of Thick-Section Composites under Flexural Loading," Proceedings of the SEM Annual Conference on Theoretical, Experimental and Computational Mechanics, Vol. 1, June 7-9, (1999), pp. 630- 635.
  21. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Mahfuz, H. and Jeelani, S.  "Manufacturing and Low Velocity Impact Response of Sandwich Composites with Hollow and Foam Filled Z-Pin Reinforced Core," Journal of Composites Technology and Research, JCTRER, Vol. 21, No.2, (April 1999), pp. 84-97.
  22. Mahfuz, H., Mamun, W., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.  "High Strain Rate Response of resin Infusion Molded Sandwich Composites,"1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, AMD-Vol. 235, Thick Composites for Load Bearing Structures, pp. 105-112.
  23. Mahfuz, H., Zaman, K., Hisham, M., Vaidya, U. K., Haque, A. and Jeelani, S.  "Fatigue Modulus Concept and Life Prediction of Thick-Section S2-Glass/Vinylester Composites under Flexural Loading," ASME 1999, MD-Vol. 86, AMD-Vol. 232, Durability and Damage Tolerance of Composite Materials and Structures, pp. 101-106.
  24. Hosur, M. V., Vaidya, U. K., Haque, A., Kulkarni, M, Kulkarni, R. and Jeelani, S. "Evaluation of Ballistic Impact Damage of Fiber Reinforced Plastic Laminates Bonded by Polycarbonate Face Sheets,” 1999 ASME Mechanical Engineering Congress and Exposition, Noise and Acoustic Division Publication NCA-Vol. 26, pp.301-312. Fairfield, NJ.
  25. Vaidya, U. K., Kamath, M. V., Hosur, M. V., Haque, A. and Jeelani, S. "Low-Velocity and Compression After Impact Response of Pin-Reinforced Sandwich Composites,” 1999 ASME International Mechanical Engineering Congress and Exposition, Materials Division Publication, MD-Vol. 86,  pp 89-100,  Fairfield, NJ. pp. 1-10.
  26. Haque, A., Rahman, M., Mahfuz, H., Vaidya, U. K. and Jeelani, S " Durability and Damage Development in Woven Ceramic Matrix Composites Under Tensile and Fatigue Loading at Room and Elevated Temperatures,” MD-Vol. 86, Durability and Damage Tolerance of Composite Materials and Structures, 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN.
  27. Vaidya, U. K., Jadhav, N., Hosur, M. V., Haque, A., Mahfuz, H. and Jeelani, S. " High Strain Rate Impact Response of Infusible Neat Resins and VARTM S2-Glass Reinforced Fabric Composite,” 1999 SAMPE Technical Conference: Advanced Materials and Processes Preparing for the New Millennium, Vol. 31, pp.89-100, Covina, CA.
  28. Mahfuz, H., Rahman, M., Haque, A., Fotedar, E., Vaidya, U. K. and Jeelani, S. " Buckling Analysis of Composite Isogrid Cylinders Using Finite Element Method,” International Conference on Advanced Composites, Hurghuda, Egypt, December (1998), pp. 673-682.
  29. Vaidya, U. K., Hosur, M. V., Kumar, P., Earl, D., Cloyd, M., Mahfuz, H., Haque, A. and Jeelani, S. "High Strain Rate Response of Sandwich Composites with Integrated PARABEAM Core,” International Conference on Advanced Composites, Hurghuda, Egypt, December (1998), pp. 215-226.
  30. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A and Jeelani, S.  "Compression Behaviour of Glass/Vinyl Ester Composites for Integral Armor Application" IMECE-98, International Mechanical Engineering Congress and Exposition, Anaheim, California, November 15-20, (1998), USA
  31. Hosur, M. V., Vaidya, U. K., Jadhav, N., Abraham, A. and Jeelani, S. " Static and High Strain Rate Compression Testing of Thick Section S2 Glass/Vinyl Ester Composites for Integral Armor Applications,” 1998 ASME International Mechanical Engineering Congress and Exposition, Materials Division Publication, pp.293-300, November 15-20, (1998), Anaheim, CA.
  32. Vaidya, U. K., Kumar, P., Hosur, M. V., Kamath, M. V., Mahfuz, H. and Jeelani, S. "Low Velocity and High Strain Rate Impact Response of Sandwich Composites,” Proceedings of the 30th International SAMPE Conference, October 20-24, (1998), San Antonio TX.
  33. Motuku, M., Janowski, G., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Low Velocity Impact Response of Vinyl Ester 350 and C50 Neat Resins,” Proceedings of the ASME, NAC-Vol. 25, pp.283-296, (1998).
  34. Hosur, M. V., Vaidya, U. K., Abraham, A. and Jeelani, S. "Effect of 3D Reinforcement on the Low-Velocity Impact Response of S2-Glass/Vinyl Ester Composite Laminates,”  ASME International Mechanical Engineering Congress and Exposition, NCA-Vol. 25, November 15-20 (1998), pp.303-308, Anaheim, California.
  35. Vaidya, U. K., Mohan, P., Hosur, M. V. and Jeelani, S. "Low Velocity Impact Response of Hybrid Sandwich Composites,” 30th International SAMPE Technical Conference, Vol. 30, pp. 96-104, San Antonio, TX. October 20-24, (1998).
  36. Vaidya, U. K., Kumar, P, Hosur, M. V.,Kamath, N. V., Mahfuz, H. and Jeelani, S. “ Low Velocity and High Strain Rate Impact of Pin Reinforced Foam Core Sandwich Composites,” Proceedings of the Japan-US Conference on Composite Materials, September 24-25, (1998), pp. 721-729, Baltimore, MD.
  37. Vaidya, U. K., Mohan, P., Kamath, M. and Jeelani, S. “Low Velocity Impact Response of Sandwich Composites With Innovative Cores,” International Conference of Composites Engineering (ICCE-5), Las Vegas, Nevada, July (1998).
  38. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K., and Jeelani, S.  "Response of Composite Isogrid Cylinders under Axial Compression," 2nd International Conference on Composite Science and Technology (ICCST/2), Vol. 1, June 9-11, (1998), pp. 325-331.
  39. Mahfuz, H., Lokesh, B., Vaidya, U. K. and Jeelani, S. "Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites," Developments in Theoretical and Applied Mechanics, Vol. 9 (1998), pp. 117- 128. 
  40. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. “Hybridized Resin Matrix Approach Applied to Development of Carbon/Carbon Composites,” 39th AIAA/ASME/ASCE/ASC Conference, Long Beach, CA, April (1998).
  41. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and Jeelani, S. “Manufacturing of Thick Section Composites Using Low Cost Liquid Molding Processes,” 19th SECTAM Conference on Theoretical and Applied Mechanics, (1998), pp. 139-150.
  42. Vaidya, U. K., Kamath, M. V., Mahfuz, H. and Jeelani, S. "Low Velocity Impact Response of Resin Infusion molded foam Filled Honeycomb Sandwich Composites," Journal of Reinforced Plastics and Composites, Vol. 17, No. 9, (1998),  pp. 819-849. 
  43. Mahfuz, H., Gama, B., Raines, R. and Jeelani, S. “High Strain Rate Behavior of the Component Materials of an Integral Armor,” 29th International SAMPE Technical Conference, October 29 - Nov.1 (1997), pp. 614-624.
  44. Mahfuz, H., Rahman, M., Das, P., Vaidya, U. K. and Jeelani, S. “Finite Element Analysis of Composite Isogrid Cylinders,” 29th International SAMPE Technical Conference, October 29 - Nov.1 (1997), pp. 577-589.
  45. Mahfuz, H., Elton, K., Das, P., Vaidya, U. K. and Jeelani, S. “High Frequency Fatigue of Continuous Silicon Carbide Fiber Reinforced Silicon Nitride Matrix Composites,” 29th International SAMPE Technical Conference, October 29 - Nov.1 (1997), pp. 128-141.
  46. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. “Manufacturing and Low Velocity Impact Response of Innovative Sandwich Composites,” 29th International SAMPE Technical Conference, October 29 - Nov.1 (1997), pp. 713-724.
  47. Vaidya, U. K., Abraham, A., Mahfuz, H. and Jeelani, S.  “Manufacturing of Composite Integral Armor Using Liquid Molding Process,” 29th International SAMPE Technical Conference, October 29 - Nov.1 (1997), pp, 523-531.
  48. Haque, A., Ali, M., Mahfuz, H. Jeelani, S.  “Rate Dependent Compressive Response of S2-Glass/Vinylester Composites,” 29th International SAMPE Technical Conference, October 29 - Nov. 1(1997), pp. 698-712.
  49. Vaidya, U. K., Mahfuz, H., Jeelani, S. and Motuku, M. “Low Velocity Impact Response of Polymer Composites with Self-Healing Capability,” Alabama Materials Research Conference, October 25-26, (1997).
  50. Vaidya, U., Mahfuz, H., Jeelani, S. and Motuku. M. “Low Velocity of Impact Response of Polymer Composites with Self Healing Capability,” Alabama Materials Research Conference, Huntsville, Alabama, October 25-26, (1997).
  51. Vaidya, U. K., Kamath, M., Mahfuz, H. and Jeelani, S. “Low Velocity Impact Response of Unconventional Sandwich Composites,” Proceedings of the American Society of Composites, pp. 562-571, October 6-8, (1997), Dearborn, MI.
  52. Krishnagopalan, J., Vaidya, U. K., Abraham, A., Murthy, C. R. L., Fotdar, K., Mahfuz, H. and Jeelani, S. “ Manufacturing of Composite Integral Armor Using a Cost Effective Resin Infusion Process,” American Institute of Chemical Engineers Meeting, Chicago, II, September (1997).
  53. Mahfuz. H., Gama, B., Raines, B. and Jeelani, S.  "High Strain Rate Behavior of Woven Composites," 4th   International Conference on Composites Engineering (ICCE - 4), Hawaii, Vol. 1, July 6-11 (1997), pp. 631-632.
  54. Haque, A., Johnson, J., Vaidya, U. K., and Jeelani, S. "Static Compression and Compression-Compression Fatigue of S2-Glass/Vinyl-Ester Composites," 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, Vol. 1, July 6-11 (1997), pp. 408-409.
  55. Vaidya, U. K., Krishnagopalan, J., Haque, A., Mahfuz, H. and Jeelani, S. "Non- Destructive Characterization and Low Velocity Impact Response of Integral Armor Components," 4th International Conference on Composites Engineering (ICCE - 4), Hawaii, Vol. 1, July 6-11 (1997), pp. 1009-1010.
  56. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S. "Finite Element Modeling of the High Strain Rate Behavior of S-2 Glass/Vinyl Ester Composites Under Compressive Loading," 11th International Conference on Composite Materials (ICCM-11), Melbourne, Australia, Volume V, July (1997), pp. 819-829.
  57. Mahfuz, H., Haque, A., Jeelani, S. and Vaidya, U. K. “Fatigue Behavior of Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMC)- Experimental and Statristical Analyses,” Symposium on Processing, Characterization, and Modeling of High Temperature Monolithic and Composite Materials, The 1997 Joint ASME/ASCE/SES Summer Meeting, June 29-July 02 (1997), Northwestern University, Evanston, IL.
  58. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S. “Experimental and Finite Element Hybrid Stress Analysis of Thick Section S2-Glass Composites,” 19th Southeastern Conference on Theoretical Applied Mechanics (SECTAM), May 3-5, (1997), Orlando, Florida.
  59. Vaidya, U. K., Abraham, A., Hosur, M. V., Kumar, P., Haque, A., Mahfuz, H. and Jeelani, S. “ Manufacturing of Thick Section Composites Using Low-Cost Liquid Molding Processes,” 19th Southeastern Conference on Theoretical and Applied Mechanics (SECTAM), May 3-5, (1997), Orlando, FL., pp. 139-150.
  60. Haque, A., Vaidya, U. K., Ali, M., Fotedar. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation on High Strain Rate Behavior of Glass/Epoxy Composites,” Engineering and Architecture Symposium, PVA&M, February 6-7 (1997), pp. 491-498.
  61. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. "Fatigue Damage in S2- Glass/Vinyl Ester Thick Composites,” NCA-Vol. 24, ASME, (1997), pp.247-257.
  62. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. " Fatigue Damage in Glass/Vinyl Ester Thick Composites,” ASME International Congress of Mechanical Engineering and Exposition, Proceedings of the ASME Noise Control and Acoustic Division, NCA-Vol. 24(1997), pp.247-258.
  63. Vaidya, U. K., Dadzie, P., Haque, A., Mahfuz, H. and Jeelani, S. "NDE and Characterization of Micro fibers Modified Textile Carbon/Phenolic and Carbon/Carbon Composites," Journal of Reinforced Plastics and Composites, Vol. 16, No. 11,(1997), pp. 968- 1001. Mahfuz, H., Lokesh, B., Das, P., Vaidya, U. K. and Jeelani, S.  "Finite Element Modeling and Photo elastic Analysis of an Integral Armor under Flexural Loading," NCA-Vol. 24, Proceedings of the ASME Noise Control and Acoustic Division, ASME 97, (1997), pp. 235-246.
  64. Mahfuz, H., Gama, B., Raines, R., Haque, A. and Jeelani, S.  "High Strain Rate Compression Behavior of Matrix Materials," 5th International Symposium on Advanced Materials (ISAM - 5), Islamabad, Pakistan (1997), Proceedings: pp. 1-9.
  65. Haque, A., Johnson, J., Vaidya, U. K. and Jeelani, S. "Fatigue Damage in S2- Glass/Vinyl Ester Thick Composites," ASME, NCA-Vol. 24, (1997), pp.247-257.
  66. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "NDE of Thick Section Composites under Static Compression and Cyclic Loading,” 14th. World Conference on Nondestructive Testing, New Delhi, December 6-13 (1996).
  67. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. "Sensor-Property-NDE Relationship of Polymeric Composites Processed Through Resin Infusion,” Smart Materials and MEMS, SPIE-96, Vol. 331, December 11-14 (1996), pp. 654-667, Bangalore, India
  68. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "NDE of Sandwich and Hybrid Carbon-Carbon Composites," Journal of Reinforced Plastics and Composites, Vol. 15, (October 1996), pp. 988- 1010. Vaidya, U. K., Sodah, S. and Jeelani, S. "Toughening and Densification Concepts Applied to Development of Carbon/Carbon Composites,” ASME International Congress of Mechanical Engineering, NCA, Vol. 2 (1996), pp.34-40.
  69. Vaidya, U. K., Fotedar, K., Mahfuz, H. and Jeelani, S. “Process Related Defects and High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites Through a comprehensive NDE Approach,” 14th. World Conference on Nondestructive Testing, New Delhi, December 6-13 (1996).
  70. Haque, A., Vaidya, U. K., Mahfuz, H. and Jeelani, S. “Effect of Fiber Orientation on HRS Response of Glass Fiber Reinforced Composites,” 28th. International SAMPE Conference, October 12-15 (1996), Seattle, WA.
  71. Mahfuz, H., Vaidya, U. K., Haque, A. and Jeelani, S. “Experimental and Finite Element Study of Static Compression and Reverse Fatigue Behavior of Thick Section Composites,” 6th International Conference on Marine Applications of Composite Materials (MACM'96), March 19-21 (1996), Cocoa Beach, FL.
  72. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K., Yu, D. and Jeelani, S. "Fatigue Damage and Residual Strength Evaluation of Resin Transfer Molded (RTM) Composites under Reversed Cyclic Loading,” International Mechanical Engineering Congress and Exposition, 1995 Winter Annual Meeting of the ASME, NCA-VOL.20/AMD-Vol. 211, November 12-17 (1995), San Francisco CA. 
  73. Mahfuz, H., Saha, M., Vaidya, U. K., Biggs, R. and Jeelani, S. "Prediction of the Dynamic Response of Toughened Graphite/Epoxy Composite Plates at Low Velocity Impact - A Numerical Study,” 27th International SAMPE Technical Conference, Albuquerque, New Mexico, Vol. 27, October (1995), pp. 830-842.
  74. Vaidya, U. K., Mahfuz, H. and Jeelani, S. " Hybridization Concepts in the Development and Nondestructive Characterization of Carbon-Carbon Composites,” Proceedings of the 27th International SAMPE Technical Conference, Albuquerque, New Mexico, October (1995), pp. 453-460.
  75. Vaidya, U. K., Wheeler, R., Mahfuz, H. and Jeelani, S. "Compression Behavior and NDE of Stiffened Panels,” 27th International SAMPE Technical Conference, Albuquerque, New Mexico, Vol. 27, October (1995), pp. 711-721.
  76. Mahfuz, H., Mian A. K. M. A., Vaidya, U. K, Brown, T.  and Jeelani, S.  "Study of the Interface Behavior of SiCf/Si3N4 Composites Using a 3-D Unit Cell Model,” 4th International Symposium on Advanced Materials (ISAM-4), Islamabad, Vol. 1, Pakistan, Sept. 17-21, (1995), pp. 667-677.
  77. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Acoustic-Ultrasonic Characterization of Carbon-Carbon Composites with Stretch Broken Fabric Architecture,” 10th International Conference on Composite Materials (ICCM-10), Vol. V, August (1995), pp. 511-526.
  78. Mahfuz. H., Saha, M., Vaidya, U. K. and Jeelani, S.  "Impact Damage and Residual Strength of Resin Infiltrated Toughened Graphite/Epoxy Panel,” 10th International Conference on Composite Materials (ICCM-10), Vancouver, Canada, Vol. V, August (1995), pp. 671-678.
  79. Mahfuz, H., Vaidya, U. K., Muneeruzzaman, M., Brown, T. and Jeelani, S.  “Fatigue Damage Analysis of SiCf/Si3N4 Composites under Cyclic Loading at Elevated Temperature, American Ceramic Society (AcerS),” Annual Meeting and Exposition, April 30-May 4 (1995), Cincinnati, OH.
  80. Vaidya, U. K., Haque, A., Mahfuz, H. and Jeelani, S. "Effect of Short Fiber Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic Emission Parameters of Carbon/Phenolic and Carbon Composites,” 4th Annual Research Symposium, American Society of Nondestructive Testing (ASNT) March 21-23 (1995), pp. 244-246.
  81. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Nondestructive Evaluation/Characterization of Hybrid and Sandwich Carbon/Carbon Composites, 19th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL, Vol. 16, No. 4,  January 8-12 (1995), pp. 289-298.
  82. Mahfuz. H., Vaidya, U. K., Muneeruzzaman, Brown, T. and Jeelani, S.  "Room and High Temperature Fatigue Damage Evaluation of SiCf/Si3N4 Composites,” 19th Annual Conference, American Ceramic Society, Cocoa Beach, FL, Vol. 16, No. 4, January 8-12 (1995), pp. 351-360.
  83. Gajiwala, H., Vaidya, U. K., Sodah, S. and Jeelani, S. "Novel Processing Techniques for Low Porosity Carbon-Carbon Composites,” ASME International Congress of Mechanical Engineering, NCA_Vol. 20 (1995) pp. 241-248.
  84. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S. "Fatigue Damage and Residual Strength of Resin Transfer Molded Composites under Reverse Cyclic Loading,” ASME Conference, Innovative Processing and Characterization of Composite Materials, NCA-Vol. 20/ADM-Vol. 21 1, (1995), pp. 77-88.
  85. Mahfuz, H., Saha, M., Haque, A., Vaidya, U. K. and Jeelani, S.  "Fatigue Damage and Residual Strength of Resin Transfer Molded Composites under Reversed Cyclic Loading," Innovative Processing and Characterization of Composite Materials, ASME, NCA-Vol. 20/AMD-Vol.21 1, (1995), pp. 77-88. 
  86. Vaidya, U. K., Mahfuz, H., Krishnagopalan, J. and Jeelani, S. "Development and Nondestructive Evaluation of Foam Core Composites,” ASME International Congress of Mechanical Engineering and Exposition, NCA Vol. 18, DE-Vol. 80(1994), Materials for Vibration and Noise Control, PP. 103-108.
  87. Mahfuz, H., Mian, A. K. M. A., Vaidya, U. K. and Jeelani, S.  "Prediction of Fiber-Matrix Interface Failure Due to Longitudinal Tensile Loading,” Materials Research Society (MRS), Fall Meeting, Boston, Massachusetts, MRS Symposium Proceedings, Vol. 365, November 27-December 2 (1994), pp. 229-236.
  88. Vaidya, U. K., Mahfuz, H. and Jeelani, S.  “Fabric Architectures - Processing - NDE Relationships in the Development of Carbon-Carbon Composites,” ASME Winter Annual Meeting, Chicago, IL, November 6-11, 1994.
  89. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "NDE of Structural and Functional Carbon-Carbon Composites,” ASME Winter Annual Meeting, Chicago, IL. NCA-Vol. 18, November 6-11 (1994), pp.103-109.
  90. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Hybridization Concepts and NDE of Carbon-Carbon Composites,” 26th International SAMPE Conference, Atlanta, GA, Vol. 26, September (1994), pp. 483-490.
  91. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Development of Nondestructive Characterization of Non-Woven Carbon Composites,” Proceedings of INDA-TEC'94 Conference, Vol. 1, September 22-24 (1994), pp. 31-37., Baltimore.
  92. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Hybridization Concepts and NDE of Carbon-Carbon Composites,” 26th International SAMPE Conference, September 1994, Atlanta, GA, Vol. 26, pp. 483-490.
  93. Mahfuz, H., Haque, A., Grant, G. and Jeelani, S. "Fracture Behavior of SiCf/Si3N4 Composites,” First International Conference on Composites Engineering (ICCE/1), Vol. 1, August 28-31(1994), pp.538-539.
  94. Vaidya. U. K., Mahfuz. H. and Jeelani, S.  "NDE of Innovative Hybrid Functional Carbon Fiber Composite,” First International Conference on Composites Engineering (ICCE/1), Vol. 1. August 28-31(1994), pp. 538-539.
  95. Mahfuz, H., Haque, A., Yu, D., Robinson, D. and Jeelani, S. "Reverse Fatigue of Resin Transfer Model Composites,” International Conference on Design and Manufacturing using Composites (ATMAM '94), Vol. 1, August 10-12 (1994), pp.23-32.
  96. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K., Krishnagopalan, J. and Jeelani, S.  "Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites', International Conference on Design and Manufacturing using Composites (ATMAM'94), Vol.1, August 10-12, (1994), pp. 488-492.
  97. Mahfuz, H. Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S.  "Fracture and Flexural Characterization of Monolithic SiC and SiCw/SiC Composites at Room and Elevated Temperatures,” 18th Annual Conference, American Ceramic Society (AcerS), Cocoa Beach, FL, Vol. 15. No. 4, January 9-14(1994), pp. 219-232.
  98. Vaidya, U. K., Mahfuz, H. and Jeelani, S.  "NDE of Novel Hybrid Structural Carbon Composites,” Proceedings of International Conference on Composites Engineering (ICCE-1), July 23, (1994), pp. 316-317, New Orleans.
  99. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "NDE of Structural and Functional Carbon/Carbon Composite after First Carbonization,” 18th Annual Conference of the American Ceramics Society, Cocoa Beach, FL, Vol. 15, No. 4, January 9-14(1994), pp. 591-598.
  100. Mahfuz, H., Xue, D. and Jeelani, S. "Response of Advanced Carbon/Carbon Composites under Tensile Loading,” 3rd Pacific Rim Forum on Composite Materials, Honolulu, Hawaii, November 2-4, (1993).
  101. Haque, A., Mahfuz, H., Yu, T. and Jeelani, S.  "Effect of Processing Parameters on Property Changes of Resin Transfer Molded Materials,” 25th International SAMPE Conference, Philadelphia, Vol. 25, October 26-28 (1993), pp. 305-319.
  102. Vaidya. U. K., Mahfuz, H. and Jeelani, S. "Vibration and Ultrasonic Nondestructive Characterization on Non-Woven and Fabric Reinforced Carbon/Carbon Composites,” 25th International SAMPE Conference, Philadelphia, October 26-28 (1993), pp. 347-352.
  103. Mahfuz, H., Das, P., Xue, D. and Jeelani, S. "Response of SiC Coated Carbon/Carbon Composites under Flexural Loading- A Combined Experimental and Finite Element Study,” 3rd International Symposium on Advanced Materials (ISAM/3), Islamabad, Pakistan, September 20-25 (1993), Vol. 1. pp. 685-695.
  104. Mahfuz, H., Das, P., Xue, D., Krishnagopalan, J. and Jeelani, S. "A combined Experimental and Finite Study to Predict the Failure Mechanisms in SiC Coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading,”  International Conference on Composite Materials (ICCM/9), Madrid, Spain, July 12-16 (1993), Vol. 2, pp. 508-515.
  105. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile Loading,” International Conference on Advanced Composites, Sydney, Australia, Vol. 1, February (1993), pp. 1369-1395.
  106. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. “Experimental and Finite Element Analysis of Advanced Carbon-Carbon (ACC-4) Composite under Tensile Loading,” International Conference on Advanced Composites, Sydney, Australia, Vol. 1, February (1993), pp. 1369-1395.
  107. Sulaiman, A., Yang, J., Jeelani, S. and Mahfuz, H.  "Stress and Stability Analysis of Thick Fiber Reinforced Laminated Composite Plates, Using Finite Element Method,” 1993 ASME Conference on Computers in Engineering, Vol. 1, pp. 499-506.
  108. Mahfuz, H., Das, P., Baker, D., Jeelani, S. and Johnson, S. "Fatigue and Flexural Response of Advanced Carbon/Carbon Composites at Room and Elevated Temperatures, 16th Annual Conference of The American Ceramic Society on Composites Materials and Structures, January 12-15 (1992), Cocoa Beach, FL., Ceramics Engineering and Science Proceedings, Vol. 1, pp.449-468.
  109. Baker, D., Mahfuz, H. and Jeelani, S “Characterization of Refractory Materials for NASA Fastener Applications," 16th Annual Conference on Composites Materials and Structures, The American Ceramic Society, January 12-15 (1992), Cocoa Beach, FL.
  110. Mahfuz, H., Das. P., Jeelani, S., Baker, D. and Johnson, S. "Fatigue Characterization of Advanced Carbon-Carbon Composites,” 1992 SEM VII International Congress on Experimental Mechanics, Vol. 2 (1992), pp. 1368-1373.
  111. Mahfuz, H., Xue, D., Jeelani, S. and Baker, D. M. "Non-Linear Response of 2D Carbon-Carbon Composites by Layered Shell Elements,” Developments in Theoretical and Applied Mechanics, Vol. 16, pp. III.1.62-72, 1992 Southeastern Conference on Theoretical and Applied Mechanics (SECTAM).
  112. Mahfuz, H., Ingram, C. I. And Jeelani, S. "Compressive Response of Thermoplastic Composites by Layered Shell Elements,” 1992 ASME Conference on Computers in Engineering, Vol. 2, pp. 95-101.
  113. Mahfuz, H., Sue, D., Jeelani, S., Baker, D. M. and Johnson, S. "Non-Linear Response of 2-D Carbon-Carbon Composites by Layered Shell Elements," Developments in Theoretical and Applied Mechanics in, Vol. 16 (1992), pp. III.I. 62-72.
  114. Mahfuz, H., Ingram, C. I. and Jeelani, S. "Compressive Response of Thermoplastic Composites by Layered Shell Elements," Computers in Engineering, Vol. 2, ASME, (1992), pp. 95-101.
  115. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. and Johnson, S.  “Characterization of High Cycle Fatigue Behavior of Titanium 5A1-2.5Sn Alloy,” 1991 SEM Spring Conference on Experimental Mechanics, June 10-13 at Milwaukee. 

1981-1990

  1. Jeelani, S. “Effect of Grinding on the Fatigue Life of Titanium Alloy (5A1-2.55Sn) Under Dry and Wet Conditions,” 1989 NASA-HBCU Forum, Huntsville, AL, March (1989).
  2. Jeelani, S.  “A Sub-Sized Fatigue Specimen,” 1987 NASA-HBCU Forum, Atlanta, Georgia, October (1987).
  3. Jeelani, S and Pilot, D.  "Residual Stress Distribution in AISI 4130 Steel Due to Machining,” 1987 NASA-HBCU Forum, Atlanta, GA, and October (1987).
  4. Jeelani, S. and Biswas S. “A DSC Method to Monitor the Presence of Water Absorbed by FM7 Epoxy Adhesive,”   1987 NASA-HBCU Forum, Atlanta, GA, October (1987).
  5. Jeelani, S. and Jordan, K. “Study of the Integrity of Bond between Carbon/Phenolic and Graphite/Phenolic Composites,” 1987 NASA-HBCU Forum, Atlanta, GA, October (1987).
  6. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718,” 1987 NASA-HBCU Forum, Atlanta, GA, October (1987).
  7. Jeelani, S. "An Investigation of Surface Damage in Fatigue Specimens,” 1987 NASA-HBCU Forum, Atlanta, Georgia, and October (1987).
  8. Jeelani, S. Natarajan, R. “Residual Stress Distribution in Machining AISI 4130 Steel Using Finite Element Techniques,” 1986 ASME International Computers in Engineering Conference, New York, August (1987).
  9. Jeelani, S. and Collins, M. “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718 Allow,” 1986 Fall Meeting of the Metallurgical Society, October 5-9 (1986), Orlando, FL.
  10. Jeelani, S, Natarajan, R. and Reddy, R. G. “Computer Aided Design of a Sub-Sized Fatigue Specimen,” 1986 ASME International Computers in Engineering Conference, Chicago, IL, July 20-24 (1986).
  11. Jeelani, S. and Mazumdar, P.  “Stain Localization in Fatigue and the Physical Basis of the Coffin-Mason Relationship,”   Southeastern Conference on Theoretical and Mechanics (SECTAM), April (1986), Columbia, South Carolina.
  12. Jeelani, S. and Pilot, D. “A study of Cumulative Fatigue Damage in AISI 4130 Steel and Titanium 6 A1-4V Alloy,”  1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  13. Jeelani, S. “Effect of Cutting Speed and Tool Rake Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum Alloy,” 1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  14. Jeelani, S. and Collins, M.  “Effect of Electric Discharge Machining on the Fatigue Life of Inconel 718 Allow,” 1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  15. Jeelani, S. and Biswas, S.  “Effect of Curing Conditions on the Strength of Adhesively Bonded Joints,” 1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  16. Jeelani, S. and Mazumdar. P. “Plastic Deformation - Its Role in Fatigue Crack Propagation,”   1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  17. Jeelani, S., Natarajan, R. and Hall, Marcus. "Design of a Sub-Sized Fatigue Specimen,” 1986 NASA-HBCU Forum, Atlanta, Georgia, April (1986).
  18. Jeelani, S. and Biswas, S. “Effect of Curing Conditions on the Strength of Adhesively Bonded Joints,”   Annual meeting of the Adhesion Society, February (1986), Charleston, South Carolina.
  19. Jeelani, S. and Natarajan, R. “Residual Stresses in Machining Using Finite Element Methods,”   ASME International Computer Engineering Conference, August 7-11, (1983), Chicago, Illinois. 

1974-1980

  1. Bailey, J. A., Jeelani, S. and Becker, S. E. “Surface Integrity in Machining AISI 4130 Steel,” ASME Winter Annual Meeting, Nov. 30-Dec. 5, (1975), Houston, Texas.  ASME paper No. 75-WA/Prod -33.
  2. Jeelani, S. and Bailey, J. A. “Surface Integrity in Machining 18% Nickel Marging Steel,” 1974 Annual Conference of the Society of Manufacturing Engineering, Dearborn, Michigan, (1974). SME Technical Paper No. IQ74-185.

 

  Return to the Materials Science & Engineering home page